Browse all practice questions for the Pesticide Applicator Training: General Standards SP39-W Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Pesticide Applicator Training: General Standards SP39-W  Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • In WET pesticide products, the concentration of active ingredient is described as what?
  • Which term best describes a pesticide that is applied and remains where applied without moving within the plant?
  • To increase overlap with a boom sprayer, you should
  • What determines overlap for a boom sprayer? (2)
  • What level of pesticide poisoning is associated with fatigue, headache, nausea, dizziness, and excessive sweating?
  • Which of the following is least appropriate during nozzle cleaning?
  • Which application method is used to treat the entire field?
  • GPA stands for
  • After applying pesticide, which period restricts entry to workers without PPE?
  • Which consequence is commonly associated with drift with respect to public opinion and regulatory actions?
  • Which drift type is the primary focus of drift control strategies?
  • Which factor is not part of the GPA determinants?
  • The waiting period after a pesticide application during which workers cannot enter without PPE is called what?
  • Even __________ compounds (high LD50) can be hazardous.
  • What units are used to indicate application speed?
  • In the spray rate equation, what does W stand for?
  • In the event of a spill, what is the second step to take?
  • What type of adjuvant aids mixing in the spray tank?
  • Which acronym stands for Restricted Entry Interval?
  • Which factor should be prioritized to minimize drift while ensuring adequate coverage?
  • What does PPE stand for?
  • What is the spray application rate equation?
  • What are the three reasons the USEPA restricts use?
  • Which storage practice is correct for pesticides?
  • Which component would you adjust to direct flow or shut off the spray during operation?
  • What does GPM stand for?
  • First Aid procedure for inhalation pesticide poisoning is to:
  • Shifting which factor makes potential drift predictable?
  • After each use, how should other PPE be cleaned?
  • Are mites insects? Why?
  • A solvent or dry carrier in a pesticide formulation is an example of which ingredient type?
  • Examples of utility agents include which components?
  • Which of the following best describes chronic exposure?
  • What is the equation to determine GPM given GPA, MPH, and width W?
  • What type of plant dies back to the ground each fall, and re-sprouts the following year, and lives for more than 2 years?
  • Which application method uses narrow strips over or alongside a row of desirable plants?
  • Which method is preferred to adjust GPM/GPA?
  • What is the number one complaint about pesticide use?
  • Which condition makes leaching more likely?
  • Which type of weed overwinters as seedlings and dies in early summer after producing seed?
  • Which method is used to prepare empty pesticide containers for disposal in sanitary landfills or recycling?
  • What is the standard test area size used when calibrating handheld sprayers?
  • Which term describes pesticides that remain active for an extended period after application?
  • Which unit is used to express area in acres?
  • Which statement is true about leaching?
  • Which label element is not an indicator of acute toxicity on a pesticide label?
  • Which symptom indicates severe poisoning?
  • Which weather condition increases vapor drift risk?
  • Which plant is NOT among those more sensitive to vapor drift?
  • The amount of material (product) applied per unit area is called
  • Which section of a pesticide label always includes the concentration of an active ingredient for a specific formulation?
  • Which of the following is a general type of weed?
  • Which action helps prevent drift by keeping the pesticide where it belongs?
  • Which term describes mixtures formed by dissolving a substance in a liquid that do not settle out and do not require agitation?
  • Uniformity of the spray is determined by which factor?
  • Which type of pesticide forms gases or vapors and is typically highly toxic, often requiring additional licensing?
  • In biennials, which year is seed produced?
  • REI is an acronym used on pesticide labels to describe a ...
  • Toxic to the pest, effective against target pests (ex: glyphosate, carbaryl, propiconazole).
  • This occurs when you are repeatedly exposed to low levels of a toxic substance over a period of time.
  • Which equipment delivers the spray to the target?
  • What term describes a pesticide that controls all related pests and affects all plants it touches?
  • Which herbicides move within the plant and are effective against pests or plant parts that your application methods cannot reach?
  • Broadcast applications are used to treat
  • In the spill response sequence, which step comes immediately before contacting the proper authorities?
  • Which device would you check to verify the spray output is reaching the boom?
  • Which signal word indicates moderate toxicity?
  • Which option describes a pesticide that does not move within the plant and acts only at the site of application?
  • Name the three general types of weeds.
  • Which movement is a route for pesticides into surface water?
  • When should you read the pesticide label?
  • Which exposure occurs when you are in contact with a toxic substance one time?
  • How many square feet are in one acre?
  • Which formulation is preferred to reduce vapor drift?
  • Which equipment uses mesh filters that prevent debris in the spray solution from clogging or damaging the equipment?
  • Which herbicides do not move within the plant and are effective only where applied?
  • Which of the following is NOT a step for ensuring a successful tank-mix?
  • If you see '3EC' on a container of liquid product, what does it mean?
  • T/F: Metal brushes and picks are safe to use for nozzle cleaning.
  • Which statement is true about annuals?
  • Which of the following is a secondary drift reduction method involving chemical adjuvant?
  • Which of the following is NOT a factor in IPM?
  • Which statement is true about compounds with a high LD50?
  • What is the formula to calculate the area of a circle?
  • Which three factors does the USEPA consider when classifying a pesticide?
  • Which of the following best describes Vapor Drift?
  • Target coverage and potential for spray drift are determined by which factor?
  • What practice helps determine if a pest has caused crop injury?
  • First aid procedure for oral pesticide poisoning is to:
  • How often should contaminated clothing be laundered?
  • Depth to groundwater is an example of which factor category affecting groundwater reach?
  • You should choose nozzles that provide good ______ for intended use and ______.
  • Glyphosate is an example of which component?
  • Which of the following statements is true about complete metamorphosis life stages?
  • What are the four general life stages of an insect that has a complete life cycle?
  • Which formula correctly calculates the area of a rectangle?
  • Knowing the pest lifecycle during scouting helps determine when to apply controls.
  • Band applications are best described as applying pesticide in
  • Which of the following is NOT a factor that determines whether a pesticide is likely to reach groundwater?
  • Which statement about net-veined leaves is true?
  • Which adjuvant is used to improve adhesion of the pesticide to treated surfaces?
  • Which of the following items is NOT part of the minimum PPE that should be worn?
  • Which organism is a microbial agent used for biological control?
  • What are some characteristics of insects?
  • Which criterion is used to evaluate how well the spray reaches the target area?
  • Which life stage is present in complete metamorphosis but not in incomplete metamorphosis?
  • Choosing nozzles designed to reduce drift influences drift by changing which factor?
  • If a label lists PHI, what information does it provide?
  • Which term describes mixtures in which one liquid is dispersed as droplets in another liquid?
  • Which of the following is considered a major route of pesticide exposure?
  • How often should you check and clean strainers?
  • The three most commonly applied pesticide groups are: a) herbicides, miticides, fungicides; b) herbicides, insecticides, repellents; c) herbicides, insecticides, fungicides.
  • What type of weed emerges in the fall, overwinters as seedlings, and produces seed and dies in early summer?
  • Noninfectious diseases are typically caused by what?
  • PHI stands for Preharvest Interval and is defined as the minimum time that must pass between application and harvest.
  • Which statement about chronic exposure is true?
  • Miticides are also known as what?
  • What type of weed emerges in the spring or summer, and produces seed and dies before winter?
  • Which type of mixture remains uniformly mixed without requiring agitation?
  • What is the purpose of a compatibility test in tank-mix planning?
  • Which statement is true about IPM?
  • Type of disease caused by living organisms, multiply, and are transmitted from plant to plant?
  • What is the general term for any chemical used to destroy, prevent, or control any form of life declared to be a pest?
  • If you see '50WP' on a container of dry product, what does it mean?
  • Which action is NOT a recommended measure to protect bees?
  • What are the two types of pesticide drift?
  • In the Triple Rinsing Procedure, how many times is the drain performed in total?
  • In the spill response sequence, which step comes last?
  • This type of pesticide controls mites, ticks (acaricides).
  • Are certain tank-mix mixtures prohibited?
  • Where should you review charts, graphs, tables, and pesticide labels to get more information?
  • This type of pesticide repels insects, vertebrates.
  • Which weeds live for more than two years and re-sprout after each fall?
  • In spray calculations, what does GPA stand for?
  • Do not have direct effect on pest, added to make the product safer (safener), more effective, or easier to use (ex: solvent or dry carrier).
  • Which option correctly describes emulsions?
  • In the Triple Rinsing Procedure, after the initial drain, the container is refilled with water to what fraction?
  • Spot application is best described as applying the pesticide to:
  • This group of infectious disease-causing organisms comes from single-celled organisms that usually enter through plant wounds (e.g., crown gall, soft rot, certain cankers).
  • What is the best use of downtime for spray equipment?
  • Which of the following is an example of cultural control?
  • What term describes the size of the area to be treated?
  • Which of the following is an example of biological control?
  • Which drift type is primarily associated with spray droplets and is the primary focus in drift control?
  • Which statement best describes a goal of Integrated Pest Management (IPM)?
  • Who bears responsibility for drift during pesticide application?
  • Which practice is NOT recommended for nozzle cleaning?
  • What steps may be taken to avoid vapor drift?
  • What term describes the formulation (product) rate?
  • What two types of ingredients make up a pesticide formulation?
  • Which two factors can you change to adjust nozzle flow rate?
  • What does the Pressure Rinsing Procedure involve?
  • The range of droplet sizes that a nozzle can produce is known as the
  • How much overlap (%) is required for hand-held spray guns?
  • The amount of material applied per unit area (total of pesticides, adjuvants, carrier, etc.) typically using gallons per acre (GPA) is called
  • Which action is the first step to take if pesticide poisoning occurs?
  • Which practice helps manage stored products?
  • LD50 is defined as the lethal dose for 50% of a test population.
  • How should Paper Bags and Cylinders be emptied?
  • How should contaminated rinse water be disposed of?
  • Which product is an example of chemical control used against weeds?
  • This type of pesticide controls weeds.
  • Spray modifiers that increase droplet size and reduce drift are known as?
  • Which statement about contaminated groundwater is true?
  • To obtain comprehensive guidance on pesticide labels and accompanying materials, you should
  • If bee hives are within 3 miles or noted 48 hours prior, what should you do?
  • Which spray modifiers help individual spray droplets spread out on the treated surface?
  • Who is responsible for a failed tank-mix when the labels provide no guidance?
  • Which of the following is NOT a cultural control method?
  • Which of the following is a biological control example?
  • Which adjuvant aids spray application and coverage?
  • What is the purpose of a containment dike during loading or cleaning a pesticide sprayer?
  • How does changing nozzle orifice size affect GPM?
  • Movement of pesticide in vapor or gas form is called?
  • Which statement about droplet size and drift is correct?
  • Which statement best describes what LD50 measures?
  • Which signal word indicates the highest toxicity?
  • What term describes the physical movement of a pesticide through air at the time of application or soon after to off-target sites?
  • Which symptom is associated with mild poisoning?
  • Which spray modifiers improve pesticide adhesion to the treated surface?
  • Which of the following lists the four groups of infectious disease-causing organisms?
  • Name the 2 types of drift.
  • What does GUP stand for?
  • Which of the following are equipment factors that influence drift?
  • Which option lists the four factors that govern the development and seriousness of infectious plant diseases (the disease pyramid)?
  • Which term describes pesticides that rapidly break down in the environment and become ineffective?
  • Can pesticide containers be burned?
  • Which option is NOT a direct purpose of a signal word on a pesticide label?
  • Which tool provides site-specific wind, temperature, and humidity information?
  • Why should you read and follow the pesticide label?
  • The __________ the LD50 number, the more toxic the product.
  • Which of the following is an example of mechanical pest control?
  • This type of pesticide controls insect pests.
  • What does REI stand for?
  • Which of the following actions best protects bees during pesticide use?
  • Which application method treats the entire area or field?
  • Which term describes a pesticide formulation with active ingredients dissolved in an oil solvent and an emulsifying agent to enable mixing with water?
  • First Aid procedure for dermal pesticide poisoning is to:
  • This group of infectious disease-causing organisms spreads spores by rain, wind, insects, seeds, equipment, soil, or water.
  • Which spray modifiers improve pesticide penetration into the treated surface?
  • Which of the following pesticides is NOT among those described as highly volatile?
  • To prevent back-siphoning when loading or cleaning a pesticide sprayer, which precaution is recommended?
  • Which of the following is a chemical control example?
  • What type of weeds have triangular stems?
  • What 3 factors is GPA determined by?
  • Lowering spray height influences drift by changing which parameter?
  • Which label element communicates the toxicity level to the user?
  • To decrease overlap, you should
  • Which equipment generates the system pressure needed to spray the pesticide solution?
  • What type of weeds live for 2 years before dying?
  • When should you flush a new sprayer?
  • In pesticide formulations, which component is considered the 'inert' portion?
  • In year two of a biennial plant's life, they bolt and produce a seed. What happens in year one?
  • Which quality describes a pesticide's ability to affect only the target pest and minimize harm to non-target organisms?
  • Which component removes debris before it enters the pump and nozzles?
  • Which statement best describes the purpose of reading the pesticide label?
  • Which action is NOT a recommended source of safety information when using pesticides?
  • Which practice helps avoid pesticide resistance?
  • Before mixing, which document should you read for instructions and restrictions?
  • Which item is NOT a groundwater reach determinant?
  • Which of the following is part of the procedure for handling contaminated clothing and PPE?
  • What units are used to indicate effective spray width per nozzle?
  • Which type of weeds have parallel-veined leaves?
  • Persistent pesticides remain sufficiently active to kill pests for days, weeks, or months after application. What is this class called?
  • Which list correctly names the four categories of spray modifiers?
  • What level of pesticide poisoning is associated with severely contracted pupils, muscle twitching, difficulty breathing, or even unconsciousness?
  • Which is a chemical control used against weeds?
  • Which of the following is not a general life stage of an insect that undergoes incomplete metamorphosis?
  • What determines the flow rate (amount of spray applied) from a nozzle?
  • In the GPM formula GPM = [GPA × MPH × W] / 5,940, what does W represent?
  • Pesticide Resistance occurs when?
  • If GPM and width W are held constant, increasing miles per hour (MPH) will cause the spray application rate (GPA) to
  • To achieve a small adjustment in spray application rate, what happens when pressure is increased fourfold?
  • If physical compatibility is a concern, what should be performed?
  • First Aid procedure for ocular (eye) pesticide poisoning is to:
  • Particle drift is primarily influenced by which factors?
  • What type of weeds have net-veined leaves?
  • What is the MOST important component of the equipment used to spray?
  • Which term describes a pest population that rebounds to higher numbers after suppression?
  • Which factor directly affects spray drift?
  • What is another name for chemicals that repel pests or vertebrates?
  • Raising the boom on a boom sprayer generally results in what change to spray overlap?
  • What term describes mixtures where fine solid particles are dispersed in a liquid and do not dissolve, requiring agitation to maintain uniform distribution?
  • This type of pesticide does not harm the user or the environment to an unreasonable degree when used according to the label directions. Which category does this describe?
  • Which of the following is a method by which pesticides can move into groundwater?
  • Which device helps keep the spray mixture in suspension to prevent settling in the tank?
  • What does RUP stand for?
  • Which term refers to pesticides that move within the plant, delivering control to areas not directly sprayed?
  • Which term describes the length of time a pesticide is in contact with the skin, the rate of absorption through the skin, and how much skin is exposed?
  • Which type of herbicide is more effective on larger, bushier weeds than on small weeds that have just sprouted?
  • A chemical that modifies a pesticide's physical properties and/or enhances its performance is called what?
  • Which are factors that influence drift?
  • What is the first step in the eight steps to take when label directions do not specify product mix order?
  • How do you convert square feet to acres?
  • Which label component communicates the hazard level to users?
  • Which steps are used to calibrate a handheld sprayer?
  • This group of infectious disease-causing organisms consists of microscopic roundworms living on plant roots or other plant parts (examples soybean cyst nematode, pine wilt).
  • Which equipment mixes pesticides to prevent settling out to bottom of tank?
  • Which acronym stands for the time after application when entry is restricted?
  • Two types of rates used in sprayer calibration and tank mixing
  • Which statement is true about nozzle flow rate changes after calibration?
  • What two factors make up a pesticide hazard?
  • Which life stage is not used in incomplete metamorphosis?
  • Which formulation contains active ingredients dissolved in an oil solvent with an emulsifying agent to form an emulsion when mixed with water?
  • Which equipment monitors pressure in booms, determines output of nozzles and affects overall spray quality?
  • What does REI stand for on pesticide labels?
  • Which term best describes pesticides that form gases or vapors?
  • What is the standard value used for pi in the circle area formula?
  • Which term describes a mixture where one liquid is dispersed as droplets in another liquid?
  • Which first aid action is recommended for oral pesticide poisoning?
  • Which droplet size provides better coverage but is more likely to drift?
  • Who is responsible for drift?
  • Using a lower spray pressure to reduce drift potential influences drift by changing what?
  • In DRY pesticide formulations, concentration of active ingredients is described as what?
  • Which statement about contaminated groundwater is true?
  • Which of the following is an example of mechanical control?
  • Bees are not active during which of the following conditions?
  • Why is it important to check nozzle flow rate after initial calibration?
  • This type of pesticide controls fungi.
  • What units are used to indicate the flow rate per nozzle?
  • This group of infectious disease-causing organisms is made up of genetic particles and is commonly transmitted by insects and seeds (examples mosaics, mottles).
  • In the eight-step mixing sequence, which step may vary and require checking the product label?
  • Knowing the pest lifecycle during scouting helps determine when to apply controls.
  • Which variable is not directly used in the provided GPM calculation?
  • Which of the following is NOT a major route of human pesticide exposure?
  • Which equipment allows for automatic or manual control to direct flow and maintain pressure?
  • What is the term used on a pesticide label to convey the product's level of toxicity to the user?
  • Which of the following best describes Particle Drift?
  • The portion of a spray pattern that overlaps with the adjoining spray is called:
  • What type of plant completes their lifecycle in one year?
  • Noninfectious diseases are typically caused by what?
  • NOT listed as a problem associated with pesticide drift?
  • Where should pesticides be stored?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy